My perfect coffee:
- fill bottle of the same volume as my press with water.
- pour ~10% of it in the electric kettle, and start it.
- put two (or three) full teaspoons of light roasted fine ground coffee in the press
- the water boiled. pour it into the press.
- put remaining cold water in kettle, start it again.
- shake the press a bit so coffee hydrates and foams. Cover the press.
- grab a coffee paper filter (circle) fold it in “pizza-like” shape 4 times and cut the outer skirt, so the new radius is about 1cm larger than the press filter.
- rest of the water is boiling now, pre-water+coffee mix has no foam. Fill press with water.
- put the paper filter on top, and insert the plunger so that along all the inner circumference, the paper filter is between the press inner wall and the plunger.
- press the coffee very slowly, don’t rush it at all. It will take you a solid minute or a bit more.
Now you have crystal, non acidic, and flavorful golden coffee. I usually pour a cup immediately, and put the rest in an all-metal insulated little bottle.
I divide the water in two parts to quickly get rid of the foam under the paper filter. Foam makes the pressing way slower. If you have time, you can immediately boil the whole water volume, but leave the coffee mix covered for 5-10 mins and the foam will be gone by then.


but, specifically:
•18.0-18.2 grams of coffee •machine set to 9 bar and about 202°F •distrubuter and very light tamp (modern machines like this one tend to pull better with a five pound tamp rather than 30 or 50 pounds) •no WDT or spray because my grinder is good •2-3 second preinfusion •19-23 second brew time (shorter when the beans are only a few days off roast, longer on days 5-7 or when it’s raining or very humid) •immediately pour into another (preheated) cup to mix the shot •drink it before it has a chance to cool