My perfect coffee:
- fill bottle of the same volume as my press with water.
- pour ~10% of it in the electric kettle, and start it.
- put two (or three) full teaspoons of light roasted fine ground coffee in the press
- the water boiled. pour it into the press.
- put remaining cold water in kettle, start it again.
- shake the press a bit so coffee hydrates and foams. Cover the press.
- grab a coffee paper filter (circle) fold it in “pizza-like” shape 4 times and cut the outer skirt, so the new radius is about 1cm larger than the press filter.
- rest of the water is boiling now, pre-water+coffee mix has no foam. Fill press with water.
- put the paper filter on top, and insert the plunger so that along all the inner circumference, the paper filter is between the press inner wall and the plunger.
- press the coffee very slowly, don’t rush it at all. It will take you a solid minute or a bit more.
Now you have crystal, non acidic, and flavorful golden coffee. I usually pour a cup immediately, and put the rest in an all-metal insulated little bottle.
I divide the water in two parts to quickly get rid of the foam under the paper filter. Foam makes the pressing way slower. If you have time, you can immediately boil the whole water volume, but leave the coffee mix covered for 5-10 mins and the foam will be gone by then.


I’ll grind up 40g of kona coffee beans, put them into the percolator with 10 cups of water. Once it’s ready, I’ll add three ice cubes with about 4 cups of fresh coffee to my mug. Brings it to a nice temperature that I can drink it right away without scalding myself. Gives me 2.5 mugs of brew, and usually when the second mug is half done I’ll add the remaining coffee into the mug to bring it back up to temp.