Has anyone here changed the Biqu B1 SKR v1.4 mainboard to SKR MINI E3 V3?

  • B0rax@feddit.org
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 months ago

    Ok, let’s look into it. (you can also send me your printer.cfg if you want) The Mini e3 v3 has the following switchable outputs:

    • HB - PC9
    • E0 - PC8
    • FAN0 - PC6
    • FAN1 - PC7
    • FAN2 - PB15

    Keep in mind that they all switch ground only. 24V is always there.

    You can use all of them for whatever you want, Klipper is very flexible here. HB is your heated bed, no questions here. E0 should be connected to your Hotted board HE0. I don’t know which of the fans on your board does what, you may need to connect them all and see which one does what (I guess your hotend does not have 3 fans). in the end you want [hotend_fan] to be the one calling the hotend (not the part!). the [fan] will be controlled by the slicer (overhangs, bridges and so on).

    DCIN on your board should ideally be connected directly to the PSU, you do not want it to be switched.

    don’t worry, we will get you back printing.