I have an Ender 5 Plus with some upgrades ("Old" MicroSwiss Direct Drive, Exoslide XY, custom shroud) and I occasionally have the issue in which the Cables for the Print head as well as the Filament Feeding Tube interfere or get caught on something on the printer.

The most recent example was when I printed (or wanted to print) something and in the middle of the night I woke up and checked up on it and it had a layer shift. Turns out that the filament feeding tube got caught in the X belt of the exoslide and prevented it from moving properly.

I already printed some brackets for the cables on the backside to the print head but the tube is still fairly unstable and flopping over after some time. The same with the filament feeding tube, since they are delivered in a spiral they are fairly fixed in that position and while I could and now have oriented it into a position that it wouldn't get caught, I need a more permanent solution.

What I am looking for is something to keep the cables upright, maybe even some "boom arm" that has some clips on it that pull/hold the cables up but also not as tight so that it interferes with anything…

Here is an image of my Printer. which pretty much shows the issue.

    • Fribbtastic@lemmy.worldOPEnglish
      2·
      1 year ago

      Yeah, I have seen this and played with that Idea for a while but never really could find something that would fit or work with how my setup is constructed. Since I have an Exoslide, custom shroud and so on, those Cable Chains are mostly designed for stock parts.

      And I am by far not skilled enough to make the adjustments or remix those things myself.

    • EmilieEvans@lemmy.mlEnglish
      1·
      1 year ago

      TL;DR No.

      short version: No. Bad design.

      longer version: Drag chains 101: defined bending radius, no overlapping cables, and strain relief on both ends. This design has none of those properties.

      very long version: Read up on energy chains.

        • EmilieEvans@lemmy.mlEnglish
          2·
          1 year ago

          I make my own when I need them, so I am not aware of good models for the Ender 5. With the points mentioned, I think you could tell whether a chain is good or not.

          Quick search. This looks promising: https://www.thingiverse.com/thing:4635454

          This is the interface/linking I use. One detail that isn’t visible: the “hub” isn’t a cylinder. It’s a truncated cone.

          end pice:

          • SpecialPurpose@sh.itjust.worksEnglish
            1·
            1 year ago

            Thank you so much for this. I definitely have a better idea of what to look for. I see exactly what you mean regarding the linkage. I have yet to see that system for limiting the radial movement. I love the elegant simplicity. I haven’t had any problems with my current chain, but I will definitely incorporate these elements into the next chain I print.