At those prices you're really better off getting a lower end NUC format computer which can be found for under $100 USD. Raspberry Pi was cool and innovative when it was new but those days are long gone.
I've bought a couple of cheap Beelink machines and I've been really happy with them so far.
So an additional device hanging in the breeze just to gain even some features and pico is hardly a replacement for full rpi gpio. Doesn't really seem like a better solution.
It all depends on what your usecase is. If someone's just starting out and wanting to do gpio stuff with a Linux os, yeah the pi may still be the best bet since it's got such a large following and guides written. But if someone's got more experience and just needs a cheap small form factor machine to run Linux and interact with some non mission critical gpios, a small nuc with a pico will give you a greater bang for the buck!
Obviously it is usecase dependent. But original comment claimed you are better off getting a small nuc for the same price, as if it is better for any usecase. Please, go reply to them :)
Seriously. I was thinking about one for a home theater pc a bit ago. Bought a used thinkcentre off ebay for $40 instead. Much better performance and price.
At those prices you're really better off getting a lower end NUC format computer which can be found for under $100 USD. Raspberry Pi was cool and innovative when it was new but those days are long gone.
I've bought a couple of cheap Beelink machines and I've been really happy with them so far.
Comparable power consumption too? Similar GPIO available?
Are you even comparing similar things
You can get similar power consumption.
As for gpio… Add a Pico as a USB pass-through for a few bucks.
So an additional device hanging in the breeze just to gain even some features and pico is hardly a replacement for full rpi gpio. Doesn't really seem like a better solution.
It all depends on what your usecase is. If someone's just starting out and wanting to do gpio stuff with a Linux os, yeah the pi may still be the best bet since it's got such a large following and guides written. But if someone's got more experience and just needs a cheap small form factor machine to run Linux and interact with some non mission critical gpios, a small nuc with a pico will give you a greater bang for the buck!
Obviously it is usecase dependent. But original comment claimed you are better off getting a small nuc for the same price, as if it is better for any usecase. Please, go reply to them :)
Dell thin clients have gpio
And are way bulkier with much larger power draw
Seriously. I was thinking about one for a home theater pc a bit ago. Bought a used thinkcentre off ebay for $40 instead. Much better performance and price.
https://cheapskatesguide.org/articles/best-mini-servers.html
This article was trending at the time. On hackernews I think.
I really did get the $40 price for an m600 like he mentioned in it.
Thank you for posting this!
Would you recommend a particular Beelink model?
I have been interested after seeing some reviews, but I'm not sure what would be the best deal.
Hence would greatly appreciate some recommendations.