• Wogi@lemmy.world
      link
      fedilink
      arrow-up
      3
      arrow-down
      1
      ·
      11 months ago

      No. I’ve spent hours googling my problem and trying every solution that popped up. The server is behind a router, and no amount of port forwarding and firewall permissions is getting past it for whatever reason.

      • AlexWIWA@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        Are you on apartment internet by chance? You’ve probably got a double NAT. In which case you’ll need a server, outside the network, that can make a tunnel to your server.

        • Wogi@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          11 months ago

          There are a few things plugged in to that router that I’ve never had an issue accessing, but they just need basic Internet access as far as I understand

      • Sarmyth@lemmy.blahaj.zone
        link
        fedilink
        arrow-up
        1
        ·
        11 months ago

        I had a similar issue in my home where I ran a nighthawk router at the back of my house connected to the ATT router/modem at the front of the house. I let them run as separate networks for a long time, and that prevented anything not connected to the same router as the jellyfin server from seeing it.

        I recently got my act together and switched the router to “access point mode” and the house is all 1 network now. The jellyfin server is available on everything in the house as well. After the change, I felt silly I had it the other way for years because it sure helps many of the other wifi objects in my home as well.