I currently have a Dell laptop that runs Windows for work. I use an external SSD via the Thunderbolt port to boot Linux allowing me to use the laptop as a personal device on a completely separate drive. All I have to do is F12 at boot, then select boot from USB drive.

However, this laptop is only using 1 of the 2 internal M.2 ports. Can I install Linux on a 2nd M.2 drive? I would want the laptop to normally boot Windows without a trace of the second option unless the drive is specified from the BIOS boot options.

Will this cause any issues with Windows? Will I be messing anything up? For the external drive setup, I installed Linux on a different computer, then transferred the SSD to the external drive. Can I do the same for the M.2 SSD – install Linux on my PC, then transfer that drive to the laptop?

Any thoughts or comments are welcome.

Edit: Thank you everyone! This was a great discussion with a lot of great and thoughtful responses. I really appreciate the replies and all the valuable information and opinions given here.

  • 520@kbin.social
    link
    fedilink
    arrow-up
    9
    arrow-down
    1
    ·
    edit-2
    9 months ago

    I mean it likely isn’t an issue for org security (assuming they’re using bitlocker appropriately etc.)

    Data loss/leak prevention would vehemently disagree. It’s a potential exfiltration point, especially if the org is blocking USB writes.

    Networking might have a thing or two to say about it as well, as it is essentially an untrusted setup on company networks