The title explains it well. But I installed Mint on a 2nd partition, then deleted it since I no longer used it, and now Grub dumps me to the command line on boot :/

How do I recover?

EDIT: gonna give up. Fuck grub lmao EDIT2: Just reinstalled mint and used the grub it gives to fix everything lmfao

  • 12510198@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    1
    ·
    8 months ago

    This is definitely strange, but the EFI system partition will have to be mounted to install grub to it, maybe the disk got mounted as read only, could you try explicitly mounting it as rw with this command

    sudo mount /dev/nvme0n1p1 /boot/efi -o rw
    

    and then see if you can make a file as root by doing

    sudo touch /boot/efi/test
    

    if it doesnt fail on a permissions error, try installing grub again with --removable incase this error has something to do with it trying to tell the firmware what disk to look in like this

    sudo grub-install --target=x86_64-efi --efi-directory=/boot/efi --removable
    

    hopefully this will run without error and install grub, and if it does id run it again without the removable flag

    • merthyr1831@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      It was just me not running the command with sudo, my bad!

      But even then, doing install-grub and grub-mkconfig with sudo (completing w/o errors) I’m still getting spat out onto the grub console at boot. Should I try formatting the efi partition and reinstalling grub to it?

      • 12510198@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        8 months ago

        Oh its no worries, it sounds like you just need to regenerate the grub config, you can do this by running

        sudo grub-mkconfig -o /boot/grub/grub.cfg
        

        or if your distro has it, you can just run

        sudo update-grub
        

        then grub should see the config on boot and put you in the normal graphical menu

        • merthyr1831@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          8 months ago

          Seems to work fine, but same again, nothing :/

          Is it worth me just wiping the partition and doing it from scratch?

          • 12510198@lemmy.blahaj.zone
            link
            fedilink
            English
            arrow-up
            1
            ·
            8 months ago

            I think anything that can be done with a fresh format can be done with the current one, when you ran grub-install after the issue with not running it as root, did you only do it with --removable? If so, the old grub is might be getting picked over the new grub installed at the removable fallback path, because it has a proper entry in the boot order. I dont know what key it is on your system, but if you can get into the boot order menu where it shows all the different boot devices, like where you can pick where you want to boot from, id look for one that just says something like "UEFI boot " or something like along those lines, it wont say like grub or your distro name, if there is such an option available, could you try booting from that option?

            • merthyr1831@lemmy.worldOP
              link
              fedilink
              arrow-up
              1
              ·
              8 months ago

              I ran it without the --removable flag :)

              Spamming f12 for the uefi boot menu, I have 3 options (neon, ubuntu, and ubuntu) but all 3 spit me out onto the grub console

              • 12510198@lemmy.blahaj.zone
                link
                fedilink
                English
                arrow-up
                1
                ·
                8 months ago

                Alright, could you see what the root variable is in the grub console before manually setting it by running echo $root, and if it prints anything, could you run ls / in the grub console and see if you see like home dev etc, or the directories you would expect to see in / inside linux, and if you do see anything, could you run ls /boot/grub/ and see if you see grub.cfg. But if you are already inside linux, go ahead and install grub with --removable, it wont overwrite your current installation. I dont want you to format the efi partition, incase something goes wrong and you wont be able to boot into linux at all

                • merthyr1831@lemmy.worldOP
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  8 months ago

                  So echo $root returns (hd0,gpt1). I have to set it to hd0,gpt2 to get the boot/linux dirs. I’ll try --removable and get back to ya

      • Responsabilidade@lemmy.eco.br
        link
        fedilink
        Português
        arrow-up
        1
        ·
        8 months ago

        I had an issue like that in the past

        Even after I run grub-mkconfig and put the efi files on the correct folder, it wasn’t recognized by the UEFI

        What I did was to open my BIOS and at the EFI configs, I choose manually which efi file I wanted it to open

        Maybe it does the trick to you as well

          • Responsabilidade@lemmy.eco.br
            link
            fedilink
            Português
            arrow-up
            1
            ·
            edit-2
            8 months ago

            Can’t you select the path?

            Maybe your BIOS is at the wrong EFI partition

            Make sure your UEFI is retrieving the correct path where you’re installing your grub

            Edit:

            https://www.reddit.com/r/archlinux/comments/y29whd/grub_doesnt_initilize_on_acer_laptop/

            Look at my issue in the past and see if it create an insight to you. Note that some of the commands may be different because I run Arch, so adapt it to your distro

            • merthyr1831@lemmy.worldOP
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              8 months ago

              Afraid I got nothin’ from that. It’s pretty much beyond my abilities.

              Im gonna try installing mint again and letting that fix my grub. if it doesnt, im gonna wipe and redo my install.

              Thanks for trying :)

              EDIT: Yep just stuck mint on the smallest partition the installer would let me and it “fixed” itself lol. Ah well. Until I inevitably distro hop :')