For those who don’t know what I mean:
- LMDE = Linux Mint Debian Edition, https://www.linuxmint.com/download_lmde.php
- xfce and cinnamon = desktop environments (DE)
target hardware for LMDE is an 8 year old nuked mac notebook with an intel chip.
I’ve always used xfce because it’s easy on the hardware and I don’t care that much about looks, but functionality.
I’ve never used cinnamon and I don’t know if it’s going to slow the notebook much.
Neither do I know if I can install LMDE and then change the DE to xfce.
Is LMDE being updated like the other mints? LMDE is version 6, whereas the other DE are version 21.3
I believe I’m the only one in the previous post that used the term. But, I believe a misunderstanding has occurred. Debian, plain old Debian, is (relatively) bare-bones. And with this, I mean that extra tooling and what not is absent. Sure, these extra tooling etc come at the cost of what some might regard as bloat. But, ultimately, its absence should not affect performance in any significant way (so not positively, nor negatively). Thus, LMDE and Linux Mint are actually pretty close to one another. LMDE is basically just Linux Mint (Cinnamon edition) but with a Debian base instead of being based on Ubuntu.
Excellent OP. Thank you for providing this insight on what’s important for you. With this information we’ll be able to offer better help. So, as you’ve excellently noticed already, Xfce is pretty good if you want a very functional machine that doesn’t suck a lot of resources. So, I totally support your decision for Xfce over Cinnamon as Xfce is simply less resource intensive. However, 8 GB of RAM should be pretty fine. Even GNOME should run wonderfully on 8 GB of RAM, so Cinnamon should not cause any troubles. But, if you’ve still got concerns and if you’re already on an SSD, then continue using Xfce as it’s otherwise one of the better DEs out there. But, if you’re not on an SSD yet, then consider slipping one inside; it will matter a lot.
Regarding your actual query, installing Xfce in retrospect to LMDE should work, but you might get yourself into more trouble than it’s worth. Therefore, I’d advice you to simply get Linux Mint Xfce Edition and call it a day. Going for the Edge ISO (which by default comes with Cinnamon) for the latest (and greatest) kernel and retroactively trying to setup Xfce should (once again) cause you more troubles than it’s worth it. So, in the end, I’d like to recommend you either Linux Mint Xfce Edition or MX Linux (which is based on Debian Stable (so not Ubuntu) and actually defaults to Xfce). Honestly, they’re mostly two flavors/interpretations that try to accomplish very similar goals. So, you should be fine with either one of the two.
model is a MacBook Pro, Intel Core i5-4278U @ 2.60GHz, model A1502 (EMC 2875), Retina Mid-2014 13" with an embedded SSD
Incidentally, I got the notebook as a present, got rid of mac OS and installed xubuntu 23.10 on it. Some mac OS users mean this company deliberately slows down old computers so users feel compelled to buy something newer. Can it be that’s why this notebook is so slow? I didn’t do anything fancy to install xubuntu, just used the whole space to install from a usb stick so I wonder if some residual software is still present.
Unfortunately, I don’t have any first-hand experience with this device. But, I do own the following potato; an Acer laptop with Intel Celeron, 2GB of RAM and no SSD from 2014-2016. And while the experience is pretty bad (on Zorin OS lite), it does its job as a backup laptop every once in a while. Compared to this potato, your device should be a lot more capable. So, either your expectations are off. Or, there’s something legitimately wrong with the hardware found on the device. Have you done any benchmarks to see if they work as expected?
Slowing down of devices is AFAIK done (un)intentionally through updates. In a lot of cases either some functionality is removed post release for security reasons or (through technological advancements) more is expected from your average device and hence older devices fail to compete. I don’t think you should suspect anything else. Nonetheless, as previously alluded to, maybe some hardware failure is the cause.
This description of the installation seems fine. If it makes you feel better, you could consider deleting all partitions through something like GParted. But, usually, no residual software should be left behind.
Out of curiosity, what’s the issue with installing a different DE?
There doesn’t necessarily have to be an issue. Heck, this simple operation (i.e. installing an additional DE on an existing system) works pretty fine on Arch/Debian etc.
However, as Linux Mint (and its family/brand of related distros) are designed/setup/opinionated in a certain way with a specific scope/vision, just installing Xfce on top of Linux Mint (proper/regular) doesn’t just give you Linux Mint Xfce Edition; you can try this out for yourself if you’d want to. Instead, you get something that looks more akin to Ubuntu with Xfce installed and some Linux Mint tools. Similarly, installing Xfce on top of LMDE doesn’t give you a proper LMDE Xfce edition. Which, to be fair, isn’t the worst thing out there and I’m pretty sure that someone out there will be pretty happy with it. But, one might also argue (as I certainly am) that, instead of that amalgamation (read: FrankenDebian), one would simply be better off with the Linux Mint Xfce Edition for which the ISO can be acquired directly from the Linux Mint team.