Fun fact: Torx screwdrivers are compatible with Torx Plus screws, but Trox Plus screwdrivers are only compatible with Torx screws that are one size larger
Fun fact: Torx screwdrivers are compatible with Torx Plus screws, but Trox Plus screwdrivers are only compatible with Torx screws that are one size larger
Removed by mod
How do you feel about square drive? I’m no carpenter, just someone that’s done enough work around the house, but I’ve found that Torx are the best option but square is a close second (but I don’t think I’ve used them in any especially high torque situations, and they may fall short there).
Removed by mod
Square and Robertson are different. No taper in square
So square is a close second in terms of quality, while being vastly simpler and cheaper to manufacture. Seems to me like i’d prefer square.
Also i’d be terrified of getting dirt in a torx screw, good luck cleaning it to make it usable again. Though i haven’t actually had this problem personally so it’s just a hunch
Removed by mod
I have torx all over my mountain bike that gets caked in dirt, a little bit of water and a pick gets them usable in seconds. I could argue that hex is superior to square but they’re both worse than torx so who really cares.
Torx, hex, and square/Robertson all require broaching, generally with a rotary broach. The manufacturing process is basically identical, though the manufacturing of the machine tools varies slightly.
Torx should be the default over Phillips for sure. Phillips is fine for shit like access panels or screw terminals. Slotted is useless for anything but the adjustment on pots and thermostats. Robertson is just a proto-torx. Everything else either exists to make someone money or is a bolt
Robertson drive tho
robertsons are tapered, so unless you get a proper positive lock, or they have dirt in them or something, they’re more liable to stripping out. But other than that, they’re great.
Least favorite for sure.
Vastly Superior to Philips, which is vastly superior to blade/slotted for anything resembling a power tool.
Fellow contractor here. Torx or go home. Drywall screws are the only exception I’m willing to make.
Where do you buy torx wood screws or torx metal screws?
I’ve never seen any.
Most screws sold around here have a torx head
IIRC Spax and GRK make torx multi-purpose fasteners that you can use for wood and metal
And a set of Allen keys usually saves a trip to the hardware store if you’re missing the right size Torx bit.
Hexes save trip to store when you need torx? How?
Because a hex key can fit (albeit imperfectly) into a Torx opening and loosen or tighten the fastener as needed.
It’s more likely to slip or strip, but it’s better than nothing.
The opposite is also true.
Robertson is superior to all.
What about hexes?
Torx can’t hold shit. They’re single use screws.