Basically every local service is accessed via a web interface, and every interface wants a username and password. Assuming none of these services are exposed to the internet, how much effort do you put into security here?
Personally, I didn’t really think about it when I started. I make a half-assed effort at security where I don’t use “admin” or anything obvious as the username, and I use a decent-but-not-industrial password - but I started reusing the u/p as the number of services I’m running grew. I have my browsers remember the u/ps.
Should one go farther than this? And if so, what’s the threat model? Is there an easier way?

  • BearOfaTime@lemm.ee
    link
    fedilink
    English
    arrow-up
    18
    arrow-down
    17
    ·
    edit-2
    2 months ago

    IP4 is shit

    Lol, right, right. It’s only run the internet for what, 40 years now?

    Guess you missed the recent gaping hole in IP6 on Windows?

    IP6 is only really useful in large (i.e. enterprise) environments . It offers no practical benefit to small networks at the moment.

    And even enterprise will only switch as they build out new infrastructure. The cost to switch is very high, and the risk is far more concerning than any potential benefit.

    • 2xsaiko@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      17
      arrow-down
      3
      ·
      2 months ago

      It offers no practical benefit to small networks at the moment.

      The internet is not a “small network”, and I assume your small network is connected to it. You need local IPv6 routing to have access to IPv6-only hosts which are becoming more and more because it’s reasonable in terms of price to get an IPv6 block unlike IPv4 blocks which are being auctioned for tens of thousands of dollars at this point (!!!).

      Also restoring global addressing is a huge benefit. P2P communications in IPv4 has become an insane mess of workarounds due to lack of addresses and this becomes worse the more layers of NAT you stick behind each other to try to save your ass from the rising tide.

      I’m really sick of hearing these idiotic excuses over and over, “it’s hard” this, “it’s unsafe” that, “it’s expensive”, “understanding the eldritch secrets of IPv6 has driven 5 of my colleagues into madness” skill issue. THERE ARE NO MORE IPV4 ADDRESSES. So unless your network is so fucked that you haven’t managed to fix it in 26 years, since IPv6 has been standardized, or it really is just an internal network with no outward facing services where it doesn’t matter when someone who just has IPv6 can’t access it because they wouldn’t be able to access it anyway, and you’re not some kind of ISP, you have no reason not to have support for it at this point and you absolutely never have a reason to tell people it’s not “useful” because that is straight up wrong in the general case even if it might be true for your situation.

    • towerful@programming.dev
      link
      fedilink
      English
      arrow-up
      11
      arrow-down
      3
      ·
      2 months ago

      How many people are running public facing windows servers in their homelab/self-hosted environment?

      And just because “it’s worked so far” isn’t a great reason to ignore new technology.
      IPv6 is useful for public facing services. You don’t need a single proxy that covers all your http/s services.
      It’s also significantly better for P2P applications, as you no longer need to rely on NAT traversal bodges or insecure uPTP type protocols.

      If you are unlucky enough to be on IPv4 CGNAT but have IPv6 available, then you are no longer sharing reputation with everyone else on the same public IPv4 address. Also, IPv6 means you can get public access instead of having to rely on some RPoVPN solution.

        • towerful@programming.dev
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          1
          ·
          2 months ago

          If the router/gateway/network (IE not local) firewall is blocking forwarding unknown IPv6, then it’s a compromised server connected to via IPv6 that has the ability to leverage the exploit (IE your windows client connecting to a compromised server that is actively exploiting this IPv6 CVE).

          It’s not like having IPv6 enabled on a windows machine automatically makes it instantly exploitable by anyone out there.
          Routers/firewalls will only forward IPv6 for established connections, so your windows machine has to connect out.

          Unless you are specifically forwarding to a windows machine, at which point you are intending that windows machine to be a server.

          Essentially the same as some exploit in some service you are exposing via NAT port forwarding.
          Maybe a few more avenues of exploit.

          Like I said. Why would a self-hoster or homelabber use windows for a public facing service?!

          • SchmidtGenetics@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            edit-2
            2 months ago

            … all it can take is going to a website from a windows device… maybe less, it was literally discovered a couple days ago…

            It’s not like having IPv6 enabled on a windows machine automatically makes it instantly exploitable by anyone out there.

            Yes it actually kinda does, that’s why this exploit is considered the highest priority and critical.

            But sure… downplay it, because we only think servers are at risk…

            Yeesh buddy.

            • towerful@programming.dev
              link
              fedilink
              English
              arrow-up
              3
              arrow-down
              2
              ·
              edit-2
              2 months ago

              If your windows computer makes an outbound connection to a server that is actively exploiting this, then yes: you will suffer.

              But having a windows computer that is chilling behind a network firewall that is only forwarding established ipv6 traffic (like 99.9999% of default routers/firewalls), then you are extremely extremely ultra unlucky to be hit by this (or, you are such a high value target that it’s likely government level exploits). Or, you are an idiot visiting dogdy websites or running dodgy software.

              Once a device on a local network has been successfully exploited for the RCE to actually gain useful code execution, then yes: the rest of your network is likely compromised.
              Classic security in layers. Isolatation/layering of risky devices (that’s why my homelab is on a different vlan than my home network).
              And even if you don’t realise your windows desktop has been exploited (I really doubt that this is a clean exploit, you would probably notice a few BSOD before they figure out how to backdoor), it then has to actually exploit your servers.
              Even if they turn your desktop into a botnet node, that will very quickly be cleaned out by windows defender.
              And I doubt that any attacker will have time to actually turn this into a useful and widespread exploit, except in targeting high value targets (which none of us here are. Any nation state equivalent of the US DoD isn’t lurking on Lemmy).

              It comes back to: why are you running windows as a server?

              ETA:
              The possibility that high value targets are exposing windows servers on IPv6 via public addresses is what makes this CVE so high.
              Sensible people and sensible companies will be using Linux.
              Sensible people and sensible companies will be very closely monitoring what’s going on with windows servers exposed by ipv6.
              This isn’t an “ipv6 exploit”. This is a windows exploit. Of which there have been MANY!