Sanctions have crippled Baikal’s production and packaging capabilities

Why it matters: Global sanctions against Russian companies have worked in at least one respect: Baikal Electronics can no longer supply enough chips to meet the country’s needs, and half of the chips it produces are defective. Russia is working to build up its domestic capabilities, but it is unclear whether it can catch up.

Baikal Electronics, one of Russia’s major processor developers, has been struggling in the wake of sanctions imposed by the US and UK governments following Russia’s invasion of Ukraine in February 2022. Until then, the company ordered the production of chips, including their packaging, from TSMC.

The Taiwan-based chipmaker promptly stopped shipping processors that year because of the sanctions. The sanctions also blocked the Russian company from licensing Arm technology. Baikal, which switched from the Baikal-T series MIPS instruction set architecture to Arm years ago, used the technology in its Baikal-M, -S, and -L series chips.

The supply restrictions forced the company to turn inward to produce packaged and tested silicon. Russian business news outlet Vedomosti recently revealed that about half of the processors packaged in Russia are defective. A source told the paper that the failures are due to equipment that is not configured correctly and not having enough properly trained technicians for the chip packaging.

    • tunetardis@lemmy.ca
      link
      fedilink
      English
      arrow-up
      19
      ·
      7 months ago

      FTA:

      By 2030, the country’s goal is to manufacture chips using a 28nm process technology – something TSMC did in 2011.

      That’s assuming they really do have no choice but to do all fabrication domestically.

      • partial_accumen@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        7 months ago

        16nm from what I can tell on their Baikal-S

        I’m only seeing 16nm from the units produced by TSMC. Do you have something current that shows the domestically produced ones are also of that gate width?

        • NOT_RICK@lemmy.world
          link
          fedilink
          English
          arrow-up
          11
          ·
          edit-2
          7 months ago

          Good call out, I totally failed to recognize that any chip made on a TSMC process isn’t going to be made in Russia. I’m trying to figure out what domestic fabs exist in Russia; from what I can tell Baikal is fabless. I have found an article that states Russia is aiming for a 28nm domestic process by 2027, so I guess their best chips at this point are likely in the 40+nm range. I’m going to keep reading though because I’m definitely curious about this.

          Edit: this article paints an even worse picture for them. One of their fabs, Angstrom, had to disclose in bankruptcy proceedings 6 years ago that they hadn’t developed a process better than 250nm dispite licensing Intel 90nm process tech back in 2012.

          From what I can tell, Mikron has been able to get a domestic 90nm process and possibly a 65nm process going in their domestic fabs. Sounds like they’re 20 years behind, yikes

          • jaybone@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 months ago

            Do they need to license intel tech? Can’t they just steal it? I assume no one will enforce that.

            • NOT_RICK@lemmy.world
              link
              fedilink
              English
              arrow-up
              4
              ·
              7 months ago

              Well that licensing deal was 12 years ago. Things were very different before Russia invaded Crimea. Even if they had the ability to design smaller process chips, the machines needed to manufacture those processes are highly advanced and not manufactured in Russia.

              • HoustonHenry@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                edit-2
                7 months ago

                All this reminds me of when China was finally able to mass-produce roller-ball pen tips…in 2017! They had been importing them the whole time. In 2012, one of the CCP big wigs threw a fit that in-house roller-ball tips were shit, so the CCP ran R&D for five years to finally introduce it in 2017